mazak m codes



mazak.m.codes


M0 - programmed stop
M1 - optional stop
M2 - end of program (eia/iso)
M3 - revolution of spindle (normal)
M4 - revolution of spindle (reverse)
M5 - stop of spindle
M6 - changing of tool (eia/iso)
M7 - mist coolant
M8 - liquid coolant
M9 - stop of all coolant and compressed air
M10 - clamping of tool on the spindle
M11 - unclamping of tool on the spindle

M15 - magazine cover closed
M16 - magazine cover opened

M19 - orientation of spindle

M23 - error detection valid
M24 - error detection invalid

M30 - end of program and rewinding of tape (eia/iso)

M33 - tool length measurement unit advanced
M34 - tool length measurement unit retracted
M35 - detection of tool breakage
M36 - selection of spindle speed range (low)
M37 - selection of spindle speed range (low/medium low)
M38 - selection of spindle speed range (low/medium/medium low)
M39 - selection of spindle speed range (high)
M40 - selection of spindle speed range (neutral)

M42 - reverse rotation of indexing table
M43 - external command of m-code 3
M44 - external command of m-code 4
M45 - external command of m-code 5

M46 - A-axis unclamping
M47 - A-axis clamping

M48 - spindle speed and feed rate correction valid
M49 - spindle speed and feed rate correction invalid
M50 - air blast
M51 - spindle-through coolant
M52 - tapping coolant

M58 - check of tool life for spare-tool management

M64 - pallet door closed
M65 - pallet door opened

M68 - clamping of pallet
M69 - unclamping of pallet

M71 - selection of pallet no. 1
M72 - selection of pallet no. 2
M73 - selection of pallet no. 3
M74 - selection of pallet no. 4
M75 - selection of pallet no. 5
M76 - selection of pallet no. 6

M90 - cancelation of mirror image (mazatrol)
M91 - mirror image wpc-x valid (mazatrol)
M92 - mirror image wpc-y valid (mazatrol)
M93 - mirror image wpc-4 valid (mazatrol)

M98 - call-up of sub-program (eia/iso)
M99 - end of sub-program (eia/iso)
M100 - external command of m-code 1
M101 - external command of m-code 2

M122 - gap eliminator valid



M123 - gap eliminator invalid

M130 - niagara flood coolant ON
M131 - high pressure coolant
M132 - spindle thru air blast





No comments:

Post a Comment